App Store
Play Store
Walkin' Wheels Wheelchair for Medium Dogs, Blue
Out of stock
SKU Number
SKU# 230660002001
Price
KD 164.000
Foam Wheels : Each Wheelchair comes with an appropriate set of wheels based on your dog's Fold of Flank measurement. The 12" and 16" wheels are outfitted with bearings.
Belly Belt : The belly belt will help support dogs with back injury, disc issues, long back, or overweight dogs.
Stirrups : These are used to keep your animal's back legs from dragging on the ground if the legs are paralyzed or weak. The length of the stirrups can be easily adjusted by moving the clip down on the rope and re-tying the knot.
Leg Rings : The hindquarters of the dog are held in place by the leg rings, or our rear harness support system. We have found that most dogs adapt quickly to the leg rings. The leg rings that come with your Walkin' Wheels work great used as a lifting harness. The excess strapping can be Velco together to make handles on each side
Front Harness : The dog's head goes between the blue and black strap, and the red strap goes around the chest and clips on the side of the harness. The shoulder pads (A) are made of neoprene and keep the straps and buckles from causing discomfort for the dog. The red strap (B) goes behind the front legs, underneath the chest and holds the front harness securely when clipped into the side panel. Neoprene comfort sleeves wrap around the straps for the dogs comfort. It is best to take comfort sleeves off while adjusting the three straps snug to your dog. Comfort sleeves can be cut in half if they are too long.
Frame : The Frame itself is powder-coated aluminum. It will not bend, break, or rust. The molded plastic knuckles attach the frame and the legs in such a way they cannot possibly slip. 360 degrees of 'teeth' hold the knuckle in place at every point. On the side of the knuckle, a spring-loaded turning cap allows you to loosen the knuckle and swivel the legs up or down. About three turns of the knob should be enough. Do not turn the dial so that it comes all the way off -- although if you do, it is easy to screw back on.
Length Extenders : YThe length extenders connect the front harness in place with the cart. The length extenders are adjustable. However, there are two different sizes. If the animal is 9-19 inches you will need the smaller extenders. The small extender will already be attached to the wheelchair. If your animal's length is 18-25 inches you will need the larger extenders.
Width Connectors : The width connector connects the left and right side of the frame together. If the width of your dog is 5 - 9 1/2 inches, you will use the smaller width connector. 9 - 13.5 inches will need the longer connector.
Belly Belt : The belly belt will help support dogs with back injury, disc issues, long back, or overweight dogs.
Stirrups : These are used to keep your animal's back legs from dragging on the ground if the legs are paralyzed or weak. The length of the stirrups can be easily adjusted by moving the clip down on the rope and re-tying the knot.
Leg Rings : The hindquarters of the dog are held in place by the leg rings, or our rear harness support system. We have found that most dogs adapt quickly to the leg rings. The leg rings that come with your Walkin' Wheels work great used as a lifting harness. The excess strapping can be Velco together to make handles on each side
Front Harness : The dog's head goes between the blue and black strap, and the red strap goes around the chest and clips on the side of the harness. The shoulder pads (A) are made of neoprene and keep the straps and buckles from causing discomfort for the dog. The red strap (B) goes behind the front legs, underneath the chest and holds the front harness securely when clipped into the side panel. Neoprene comfort sleeves wrap around the straps for the dogs comfort. It is best to take comfort sleeves off while adjusting the three straps snug to your dog. Comfort sleeves can be cut in half if they are too long.
Frame : The Frame itself is powder-coated aluminum. It will not bend, break, or rust. The molded plastic knuckles attach the frame and the legs in such a way they cannot possibly slip. 360 degrees of 'teeth' hold the knuckle in place at every point. On the side of the knuckle, a spring-loaded turning cap allows you to loosen the knuckle and swivel the legs up or down. About three turns of the knob should be enough. Do not turn the dial so that it comes all the way off -- although if you do, it is easy to screw back on.
Length Extenders : YThe length extenders connect the front harness in place with the cart. The length extenders are adjustable. However, there are two different sizes. If the animal is 9-19 inches you will need the smaller extenders. The small extender will already be attached to the wheelchair. If your animal's length is 18-25 inches you will need the larger extenders.
Width Connectors : The width connector connects the left and right side of the frame together. If the width of your dog is 5 - 9 1/2 inches, you will use the smaller width connector. 9 - 13.5 inches will need the longer connector.